Pro-grade tools by trade

• Milwaukee lists 1/2 in. to 4 in. press capacity and compatibility with more than 20 fitting systems.
• Kit includes 1/2, 3/4, 1, 1-1/4, 1-1/2 and 2 in. CTS jaws, two M18 REDLITHIUM CP2.0 batteries and a carrying case.

Specs: Milwaukee product page, read Oct 4, 2026

• Weighs 3.8 lb and delivers up to 5,400 lb of force in an in-line, one-handed design.
• Kit includes 1/2, 3/4 and 1 in. copper jaws, two M12 REDLITHIUM CP1.5 batteries, a charger and a carrying case.

Specs: Milwaukee product page, read Oct 4, 2026

• 7,200 lb (32 kN) ram force, about 4 seconds per press, and an endless 360° head swivel.
• Capacity 1/2 to 4 in. copper, stainless and carbon steel and 1/2 to 2 in. PEX; 2-1/2 to 4 in. carbon steel needs the Press Booster.

Specs: RIDGID product page, read Oct 4, 2026

• Expands 3/8 in. to 1 in. Uponor ProPEX connections with an auto-rotating head.
• Kit includes 1/2, 3/4 and 1 in. RAPID SEAL expander heads, two M12 REDLITHIUM CP2.0 batteries, a charger, cone grease and a carrying case.

Specs: Milwaukee product page, read Oct 4, 2026

• Cordless sectional machine for 2 in. to 8 in. sewer laterals, rated to clear roots up to 200 ft out.
• CABLE DRIVE feeds and retracts the cable automatically; runs 7/8 in. and 1-1/4 in. sectional cables in enclosed cable reels.

Specs: Milwaukee product page, read Oct 4, 2026

• 3/8 in. cable for 1-1/2 to 3 in. lines and 1/2 in. cable for 3 to 4 in. lines; RIDGID notes it is not designed for root removal.
• Drum holds 100 ft of 3/8 in. or 75 ft of 1/2 in. solid-core (integral wound) cable.

Specs: RIDGID product page, read Oct 4, 2026

• Sectional machine with a 1/2 HP motor and a rear handle for carrying it up ladders to roof vent stacks.
• 5/8 in. cable cleans 1-1/4 to 4 in. lines through 125 ft; 7/8 in. cable cleans 2 to 4 in. lines through 150 ft.

Specs: RIDGID product page, read Oct 4, 2026

• 75 ft flexible push cable with an 18 mm HD camera head for 1-1/2 to 4 in. lines.
• Built-in, adjustable 7 in. daylight-readable touchscreen with zoom and pan, photo and video capture, and export.

Specs: Milwaukee product page, read Oct 4, 2026

• 3.5 in. color display with a 17 mm camera head lit by 4 adjustable LEDs.
• Records JPG stills and MP4 video at 640 x 480 to an SD card (8 GB card included, up to 32 GB supported).

Specs: RIDGID product page, read Oct 4, 2026

• Sonde frequencies 512 Hz, 640 Hz, 874 Hz and 33 kHz; line-trace 128 Hz, 8 kHz and 33 kHz; passive 50/60 Hz.
• Multi-directional antennas; depth is calculated and displayed automatically when over the target.

Specs: RIDGID product page, read Oct 4, 2026

• Pinpoints sewer-camera sondes and traces energized lines; an on-screen arrow points toward the sonde at start-up.
• Two 3D antennas and a 4.3 in. color LCD readable in direct sunlight; IP65 rated.

Specs: Milwaukee product page, read Oct 4, 2026

• Threads up to 1-1/4 in. black iron, stainless steel and rigid metal conduit.
• Kit includes 1/2, 3/4, 1 and 1-1/4 in. NPT forged-aluminum die heads, two M18 HIGH OUTPUT XC8.0 batteries, a rapid charger, a threading support arm and a case.

Specs: Milwaukee product page, read Oct 4, 2026

• Catalog No. 36475 is the 12-R set with NPT die heads for 1/2 in. to 2 in. pipe; listed weight 34-3/4 lb.
• Manual ratchet threader: each pipe size has its own die head, and all sets use the same 12-R dies.

Specs: RIDGID product page, read Oct 4, 2026

• Cuts Type K, L and M copper from 3/8 in. to 1 in. nominal (1/2 to 1-1/8 in. OD), adjusting to the diameter automatically.
• Runs at 500 RPM and cuts installed pipe with as little as 1-1/2 in. of clearance.

Specs: Milwaukee product page, read Oct 4, 2026

• Hydrostatic test pump for systems up to 725 PSI: heating, sprinkler, compressed air, refrigeration and other small-bore piping.
• 13.5 L plastic tank for water, oil or ethylene glycol; 38 cm³ per stroke with a two-stage lever.

Specs: RIDGID product page, read Oct 4, 2026

• Self-priming pump that moves up to 480 gallons per hour, with up to 18 ft of lift and 75 ft of head height.
• 3/4 in. brass inlet and outlet connections.

Specs: Milwaukee product page, read Oct 4, 2026

• 4-valve digital manifold with integrated vacuum gauge and a 3/8 in. vacuum port; supports over 70 refrigerants and is A2L compatible.
• Calculates superheat, subcooling and delta T; runs a temperature-compensated nitrogen pressure test; logs up to 9 jobs or 168 continuous hours.

Specs: Fieldpiece product page, read Oct 4, 2026

• Smart digital manifold with Bluetooth and a 2-way valve block; pressure range -15 to 870 psi at ±0.5% of full scale.
• Kit includes two testo 115i wireless clamp thermometers and a case; works with the testo Smart App.

Specs: testo product page, read Oct 4, 2026

• 4-valve digital manifold with a touchscreen; measures high- and low-side pressures and temperatures and calculates superheat and subcooling.
• P/N 40881 includes two TITAN temperature clamps, a vacuum sensor and a USB-C cable.

Specs: Yellow Jacket product page, read Oct 4, 2026

• Six probes in a padded case: 2 pressure probes, 2 pipe-clamp temperature probes and 2 psychrometers.
• Pressure probes read 0 to 580 psig (accuracy down to ±1 psig); pipe clamps read -50 to 257 °F (±1 °F).

Specs: Fieldpiece product page, read Oct 4, 2026

• 8 CFM two-stage rotary-vane pump with a 3/4 HP brushless DC motor; ultimate vacuum 15 microns.
• Ports: one 1/4 in., two 3/8 in. and one 1/2 in.; 8 oz oil capacity with ball-valve drain and lit oil window.

Specs: Fieldpiece product page, read Oct 4, 2026

• Cordless dual-stage pump rated at 6 CFM with an ultimate vacuum of 15 microns.
• Up to about an hour of continuous running on the included NBP2 18V 9Ah battery; NC2 charger and carry bag included.

Specs: NAVAC product page, read Oct 4, 2026

• 5 CFM cordless vacuum pump with 1/2, 3/8 and 1/4 in. ports.
• Up to 90 minutes per charge in Manifold Mode and up to 60 minutes in Default Mode.

Specs: Milwaukee product page, read Oct 4, 2026

• Measures 50 to 25,000 microns; accuracy ±(5% of reading + 5 microns) from 50 to 2,000 microns at 77 °F.
• 1/4 in. SAE male fitting; IP54; about 40 hours on 2 AA batteries.

Specs: Fieldpiece product page, read Oct 4, 2026

• Oil-less twin-cylinder compressor with a 1 HP variable-speed DC motor; runs on 95 to 130 VAC.
• Digital input and output pressure readings from -30 inHg to 600 psig; auto-stop at 0 psig, -10 or -20 inHg; high-pressure cutoff at 558 psig.

Specs: Fieldpiece product page, read Oct 4, 2026

• Oil-less twin-cylinder recovery unit with a 1 HP brushless DC motor and self-purge; 115 V/60 Hz.
• Listed R-410A recovery rates: 0.75 lb/min vapor, 14.44 lb/min liquid, 18.41 lb/min push/pull.

Specs: NAVAC product page, read Oct 4, 2026

• Cordless twin-cylinder recovery machine; A2L compatible, with a battery-door interlock.
• R-410A vapor rate of 0.73 lb/min; Milwaukee rates up to 10 lb of refrigerant recovered with the included FORGE HD12.0 battery.

Specs: Milwaukee product page, read Oct 4, 2026

• 252 lb (114 kg) maximum load on an aluminum platform.
• Accuracy ±(0.03% of reading + 0.25 oz) from 0 to 66 lb; resolution down to 0.25 oz.

Specs: Fieldpiece product page, read Oct 4, 2026

• Cordless flaring tool for copper tube in 1/4, 3/8, 1/2, 5/8 and 3/4 in. OD.
• Tool weighs 2.9 lb; NAVAC rates more than 100 flares per charge on its 7.4 V 2 Ah Li-ion battery.

Specs: NAVAC product page, read Oct 4, 2026

• Makes 45° SAE flares in 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4 in. tubing.
• Flares steel, stainless steel, hard copper and brass with walls up to 0.035 in. thick.

Specs: RIDGID product page, read Oct 4, 2026

• Cordless swaging tool with quick-connect heads for 3/8, 1/2, 5/8, 3/4, 7/8, 1 and 1-1/8 in. soft or annealed copper.
• About 12 seconds per expansion and up to 200 expansions per charge on the 7.2 V 2 Ah USB-C rechargeable battery.

Specs: NAVAC product page, read Oct 4, 2026

• Air velocity 40 to 3,960 fpm at 1 fpm resolution; accuracy ±(5% + 1 digit) of reading or ±(1% + 1 digit) of full scale.
• Built-in air temperature from -4 to 140 °F.

Specs: Fieldpiece product page, read Oct 4, 2026

• Differential and static pressure to ±16 inH2O (±4,000 Pa) with 0.001 inH2O resolution; accuracy ±1% + 0.01 inH2O.
• Air velocity 250 to 16,000 fpm and airflow up to 99,999 cfm using the duct shape and size you enter.

Specs: Fluke product page, read Oct 4, 2026

• Dual-port manometer reading to ±60 inWC at 0.01 inWC resolution (±0.02 inWC up to 2 inWC).
• Built-in pump and test leads check whether pressure switches open and close.

Specs: Fieldpiece product page, read Oct 4, 2026

• Kit: testo 300 with O2 sensor and CO sensor (0 to 4,000 ppm), mains unit, basic flue-gas probe, spare filters, EasyHeat software, case and Bluetooth connector.
• Measures flue gas and draft with built-in fine-pressure measurement; ambient CO, gas-pipe and differential-temperature tests use optional probes.

Specs: testo product page, read Oct 4, 2026

• Measures 600 A AC, 600 V AC/DC, resistance to 60 kΩ, capacitance to 1,000 µF and 200 µA DC for flame sensors.
• Contact temperature from -40 to 752 °F.

Specs: Fluke product page, read Oct 4, 2026

• True-RMS; 1,000 V AC/DC, 10 A (20 A for 30 seconds), resistance to 50 MΩ, capacitance to 9,999 µF, frequency to 200 kHz.
• Low-pass filter for readings on variable-frequency drives; Peak Capture records intermittents as short as 250 µs.

Specs: Fluke product page, read Oct 4, 2026

• True-RMS, CAT III 600 V, 6,000-count backlit display.
• Built-in non-contact voltage detection and a low-impedance mode that helps prevent ghost-voltage readings.

Specs: Fluke product page, read Oct 4, 2026

• 999.9 A AC/DC through the jaw and up to 2,500 A AC with the included iFlex flexible probe.
• 1,000 V AC/DC; inrush capture and a low-pass filter for measurements on drives.

Specs: Fluke product page, read Oct 4, 2026

• Insulation test voltages of 50, 100, 250, 500 and 1,000 V; insulation range 0.01 MΩ to 2 GΩ.
• Blocks the insulation test if more than 30 V is present and discharges capacitive voltage automatically.

Specs: Fluke product page, read Oct 4, 2026

• Reads AC voltage to 1,000 V and current to 200 A through an open fork, without test-lead contact to the live conductor (FieldSense).
• 0.7 in. fork opening fits conductors up to 4/0 AWG; voltage and current show at the same time.

Specs: Fluke product page, read Oct 4, 2026

• Traces energized and de-energized wires in walls, ceilings and floors; finds opens, shorts, breakers and fuses.
• Receiver, transmitter and the included i400 current clamp are rated CAT IV 600 V.

Specs: Fluke product page, read Oct 4, 2026

• Transmitter and receiver kit for finding breakers and tracing wires; CAT III 600 V.
• Transmitter indicates 12, 48, 120, 240 and 480 V; receiver works at 33 kHz with a backlit LCD, flashlight and non-contact voltage function.

Specs: Klein Tools product page, read Oct 4, 2026

• Tests AFCI and GFCI devices and shows how long a GFCI takes to trip.
• Large LCD; detects dual-open wiring faults; rated CAT III 135 V.

Specs: Klein Tools product page, read Oct 4, 2026

• Rated to punch holes up to 4 in. in 14-gauge mild or stainless steel; right-angle head.
• Kit includes EXACT 1/2 to 2 in. conduit punches and dies, draw studs, the Quick Connect alignment system, an M18 CP2.0 battery, charger and case.

Specs: Milwaukee product page, read Oct 4, 2026

• Manual hydraulic driver for 1/2 to 2 in. conduit-size knockouts (0.89 to 2.42 in. holes).
• Rated for up to 10-gauge mild steel or 12-gauge stainless; also punches aluminum, brass, copper, fiberglass and plastic.

Specs: Greenlee product page, read Oct 4, 2026

• 6-ton hydraulic crimper; PFM pressure control adjusts output, and a green light confirms each crimp reached pressure.
• Records every crimp; ONE-KEY builds reports and syncs crimp data to the cloud.

Specs: Milwaukee product page, read Oct 4, 2026

• 120 x 90 (10,800-pixel) infrared resolution, 60 mK thermal sensitivity, 9 Hz.
• The MAX version measures -4 to 752 °F (-20 to 400 °C); the standard TiS20+ tops out at 302 °F.

Specs: Fluke product page, read Oct 4, 2026

• 320 x 240 (76,800-pixel) IR resolution, <40 mK sensitivity, -4 to 1,022 °F in two ranges.
• MSX adds visible-camera detail to the thermal image; 3.5 in. 640 x 480 touchscreen.

Specs: FLIR product page, read Oct 4, 2026

• VOx microbolometer with 76,800-pixel resolution and <50 mK sensitivity.
• Measures -40 to 752 °F with accuracy of ±3.6 °F or 2%, whichever is greater.

Specs: Klein Tools product page, read Oct 4, 2026

• Pointfinder camera for targeting distant points in bright sunlight.
• IP65 dust and water-jet protection; drop-tested to 2 m.

Specs: Leica Geosystems product page, read Oct 4, 2026

• Range up to 400 ft with accuracy up to ±1/16 in.
• Zoom camera to find the laser spot outdoors; 360° inclinometer.

Specs: Bosch product page, read Oct 4, 2026

• M18 FUEL 1/2 in. hammer drill/driver (2904-20) and M18 FUEL 1/4 in. hex impact driver (2953-20).
• Includes two M18 REDLITHIUM XC5.0 batteries, a multi-voltage charger, side handle, belt clips and a case.

Specs: Milwaukee product page, read Oct 4, 2026

• M12 FUEL 1/2 in. hammer drill/driver (3404-20) and M12 FUEL 1/4 in. hex impact driver (3453-20).
• Includes an M12 XC4.0 battery, an M12 CP2.0 battery and a charger.

Specs: Milwaukee product page, read Oct 4, 2026

• DCD1007 1/2 in. 3-speed hammer drill rated at 2,100 in-lb of max torque.
• DCF845 1/4 in. 3-speed impact driver: 1,825 in-lb of torque and up to 3,400 RPM.

Specs: DEWALT product page, read Oct 4, 2026

• 250 lb weight capacity; IP65 weather seal.
• Impact-resistant polymer with metal-reinforced corners and locking point; 9 in. all-terrain wheels and an extension handle.

Specs: Milwaukee product page, read Oct 4, 2026

• 10 removable bins (8 small, 2 large) under a clear lid that seals each bin so parts stay put.
• Exterior 19.7 x 15.2 x 4.6 in.; interior 18.0 x 12.0 x 3.9 in.

Specs: Milwaukee product page, read Oct 4, 2026

• Holds PACKOUT modules on a floor (100 lb capacity) or a wall (50 lb capacity).
• Metal-reinforced mounting holes spaced 16 in. for studs, plus metal-reinforced tie-down points.

Specs: Milwaukee product page, read Oct 4, 2026

• 16 x 12 x 9 in. backpack; 8 lb empty, 35 lb maximum payload (Veto part VPP10066).
• 39 vertical tool pockets plus neoprene meter pockets and a magnetic screw catcher.

Specs: Veto Pro Pac product page, read Oct 4, 2026

• 8.0 in. WUXGA display up to 120 Hz that works with gloves or when wet; Exynos 1380 processor.
• IP68 and MIL-STD-810H; comes with an IP68-rated S Pen.

Specs: Samsung product page, read Oct 4, 2026

• Full-page 8.5 in. wide thermal printing at 300 dpi, up to 3 in. per second.
• USB-C, Bluetooth 5.2, MFi, NFC and Wi-Fi; prints from phones through AirPrint and Mopria.

Specs: Brother product page, read Oct 4, 2026

• 4 in. direct-thermal receipt and label printer, up to 5 in. per second; the -L version ships with the battery.
• IP54 rated with 6.59 ft drop protection.

Specs: Brother product page, read Oct 4, 2026